CLI Guide

Table 72. Details of lclog (continued)
Synopsis
racadm lclog comment edit –q <sequence number> -m <Text to be added>
racadm lclog view -i <number of records> -a <agent id> -c <category> -s
<severity> -b <sub-category> -q <sequence no> -n <number of records> -r
<start timestamp> -e <end timestamp>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or
NFS or HTTP or HTTPS or TFTP or FTP share>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or
NFS or HTTP or HTTPS or TFTP or FTP share> --complete
racadm -r <idracip> -u <idrac username> -p <idrac password> lclog export\
-f <filename> -u <username> -p <password> -l <CIFS or NFS or HTTP or
HTTPS or TFTP or FTP share>
racadm -r <idracip> -u <idrac username> -p <idrac password> lclog export\
-f <filename> -u <username> -p <password> -l <CIFS or NFS or HTTP or
HTTPS or TFTP or FTP share> -- complete
racadm lclog viewconfigresult -j <job ID>
racadm lclog worknote add -m <text to be added>
Input
● -i—Displays the number of records present in the active log.
● -a—The agent ID used to filter the records. Only one agent ID is accepted. The value is case-
insensitive. Valid Agent-ID values:
○ UEFI_SS_USC
○ CusOsUp
○ UEFI_Inventory
○ iDRAC
○ UEFI_DCS
○ SEL
○ RACLOG
○ DE
○ WSMAN
○ RACADM
○ iDRAC_GUI
● -k—Filters the records based on the filter string provided in racadm lclog view command.
● -c — The category used to filter the records. Provides multiple categories using a "," as the delimiter.
The value is case-insensitive. Valid category values:
○ System
○ Storage
○ Worknotes
○ Config
○ Updates
○ Audit
● -b —The subcategory used to filter the records. Provides multiple subcategories using a "," as the
delimiter.
● -q—The sequence number from which the records must be displayed. Records older than this
sequence number is displayed.
NOTE:
This parameter input is an integer. If an alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
RACADM Subcommand Details 97