CLI Guide

Table 72. Details of lclog (continued)
● -n—Specifies the n number of records that must be displayed. On Local RACADM, if this parameter is
not specified, by default 100 logs are retrieved.
● -r—Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS.
The time stamp must be provided within double quotation marks.
● -e—Displays events that have occurred before this time. The time format is yyyy-mm-dd HH:MM:SS.
The time stamp must be provided within double quotation marks.
● -f <filename>—Specifies the file location and name where lifecycle log is exported.
● -a <name>—Specifies the FTP Server IP address or FQDN, user name, and password.
● -l <location>—Specifies the location of the network share or area on file system where lifecycle
log is exported. Two types of network shares are supported:
○ SMB-mounted path: //<ipaddress or domain name>/<share_name>/<path to
image>
○ NFS-mounted path: <ipaddress>:/<path to image>.
● -u <user>—Specifies the user name for accessing the FTP server, or Domain and user name for
accessing network share location.
● -p <password>—Specifies the password for accessing the FTP server or share location.
● -s—The severity used to filter the records. Provide multiple severities using a "," as the delimiter. The
value is case-insensitive. Valid Severity values:
○ Warning
○ Critical
○ Info
● —m <Comment> —User comment string for a record that must be inserted in the Lifecycle Controller
log. This comment string must be less than 128 characters. The text must be specified within double
quotation mark.
NOTE: HTML-specific characters may appear as escaped text.
● -m <Worknote>—Adds a worknote (an entry) in the Lifecycle log. This worknote must be less than
256 characters. The text must be specified within double quotation mark.
NOTE: HTML-specific characters may appear as escaped text.
NOTE: For -m <worknote> and —m <comment> options, you need test alert privilege.
● --complete—Export the complete Lifecycle log as a compressed file. The exported file is of the
type .xml.gz.
● -j<Job ID>—Specifies the Job ID.
Example
● Display the number of records present in the Lifecycle log.
racadm lclog view -i
● Display the records containing the string session
racadm lclog view -k session
● Display the iDRAC agent idrac records, under the storage category and storage physical disk drive
subcategory, with severity set to warning.
racadm lclog view -a idrac -c storage -b pdr -s warning
● Display the records under storage and system categories with severities set to warning or critical.
racadm lclog view -c storage,system -s warning,critical
● Display the records having severities set to warning or critical, starting from sequence number 4.
racadm lclog view -s warning,critical -q 4
● Display 5 records starting from sequence number 20.
racadm lclog view -q 20 -n 5
98 RACADM Subcommand Details