Owners Manual

Figure 74. Installing the LOM riser card
Next steps
1. If removed, replace the expansion card riser.
2. Follow the procedure listed in After working inside your system.
Hard drive backplane
Hard drive backplane details
Depending on your system configuration, the hard drive backplanes supported in XC XR2 are listed here:
Table 36. Supported backplane options for XC XR2 systems
System Supported drives options
XC XR2 2.5 inch (x8) SAS, SATA backplane
Figure 75. 8 X 2.5 inch drive backplane
1.
Latch 2. Jumpers
3. SAS/SATA B cable connector 4. Power connector
5. SAS/SATA A cable connector 6. Signal connector
7. Front IO power cable connector
Installing and removing system components 105