Administrator Guide

Table Of Contents
To display the routing table and network statistics, type the following command:
$ racadm netstat
networktransceiverstatistics
Table 76. Details of networktransceiverstatistics
Description Displays the statistics for the list of NIC transceivers.
Synopsis
NOTE: The target server must have iDRAC Datacenter license to run this command.
racadm networktransceiverstatistics
racadm networktransceiverstatistics <PORT FQDD>
racadm networktransceiverstatistics -all
Input
<PORT FQDD>fully qualified device descriptor of the NIC
-allfor all the available network transceivers
Example
To display the available network transceivers managed by the server for statistics:
racadm networktransceiverstatistics
To display the statistics of the network transceiver specified by NIC.Integrated.1-1-1:
racadm networktransceiverstatistics NIC.Integrated.1-1-1
To display the statistics of all the network transceivers managed by the server:
racadm networktransceiverstatistics -all
nicstatistics
Table 77. Details of nicstatistics
Description Displays the statistics for the NIC FQDD.
Synopsis
racadm nicstatistics
racadm nicstatistics <NIC FQDD>
racadm hwinventory NIC.Integrated.1-1
NOTE: Partition Driver State and Partition OS Driver State properties are the same
for nicstatistics.
Examples
To display the statistics for the integrated NIC, type the following command:
racadm nicstatistics NIC.Integrated.1-1-1
Device Description: Integrated NIC 1 Port 1 Partition 1
Total Bytes Received: 0
Total Bytes Transmitted: 0
Total Unicast Bytes Received: 0
Total Multicast Bytes Received: 0
Total Broadcast Bytes Received: 0
Total Unicast Bytes Transmitted: 0
Total Multicast Bytes Transmitted: 0
104
RACADM Subcommand Details