Administrator Guide

Table Of Contents
cfgServerPowerPCIeAllocation (Read or Write)
Table 303. Details of cfgServerPowerPCIeAllocation
Description
Amount of power allocated to the PCIe cards.
This object is applicable for iDRAC Enterprise only for specific Blade Servers and not for iDRAC on Rack
and Tower Servers.
You must have the Administrator privileges to modify the value for this object.
Legal Values
0 W: For platforms that do not support PCIe cards.
100 W 500 W: For platforms that support PCIe cards.
Default
0: For platforms that do not support PCIe cards.
500 W: For platforms that support PCIe cards.
cfgServerPowerSupply
This group contains information related to the power supplies.
The cfgServerPowerSupply object group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC
Enterprise on Blade Servers.
NOTE:
The get subcommand always shows eight cfgServerPowerSupply indexes, even if two power supplies are
installed in the system or the system supports a maximum of two PSUs. For the uninstalled and unsupported units, all the
objects in the cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the cfgServerPowerSupply group.
cfgServerPowerSupplyCurrentDraw (Read Only)
Table 304. Details of cfgServerPowerSupplyCurrentDraw
Description
Displays the instantaneous current consumption in 0.1 amps.
Legal Values
A string of up to 32 characters.
Default
0
cfgServerPowerSupplyFwVer (Read Only)
Table 305. Details of cfgServerPowerSupplyFwVer
Description
Displays the firmware version of the PSU, in the format x.xx.xxx.
Legal Values
A string up to 8 characters.
Default
Null
cfgServerPowerSupplyIndex
Table 306. Details of cfgServerPowerSupplyIndex
Description
Specifies index of the PSU.
214 iDRAC Property Database Group and Object Descriptions