Owners Manual

Figure 75. Removing the cable cover
3 Using Phillips #1 screwdriver, remove the screws that connect the control panel to the system.
Figure 76. Removing left control panel
4 Holding the control panel by its sides, remove the control panel away from the system.
Next step
Install the left control panel.
Installing the left control panel
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Route the control panel cable through the side wall of the system.
2 Align the control panel with the control panel slot on the system and attach the control panel to the system.
3 Connect the control panel cable to the system board connector and secure it using cable latch.
4 Using Phillips #1 screwdriver, install the screws that secure the control panel to the system.
Installing and removing system components
119