Owners Manual
NOTE: It is recommended that you always use a static mat and static strap while working on components inside the system.
2 Open the system cover.
3 Remove the card. See Removing the BOSS card.
4 Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card.
5 Pull the M.2 SSD module away from the BOSS card.
Figure 87. Removing the M.2 SSD module
1
module connector (2) 2 screw (2)
3 module (2)
Installing the M.2 SSD module
About this task
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1 Align the M.2 SSD module connectors with the connectors on the BOSS card.
2 Align the M.2 SSD module downwards until the module is seated rmly on the card.
3 Secure the M.2 SSD module on the BOSS card with the screw.
134
BOSS card