Owners Manual

Option Description
NVDIMM-N
Memory Location
Species the location of the NVDIMM-N in each channel.
NVDIMM-N
Memory Size
Species information on the capacity of the NVDIMM-N.
NVDIMM-N
Memory Speed
Species information on the speed of the NVDIMM-N.
NVDIMM-N
Memory Firmware
version
Species information on the current rmware version on the NVDIMM-N.
NVDIMM-N
Memory Serial
Number
Species information on the serial number of the NVDIMM-N.
NVDIMM-N
Factory Reset and
Secure Erase
Enables clearing data on specic NVDIMM-N and results in loss of data on that specic NVDIMM-N.
Processor Settings
You can use the Processor Settings screen to view the processor settings, and perform specic functions such as enabling virtualization
technology, hardware prefetcher, logical processor idling, and opportunistic self-refresh.
Viewing Processor Settings
To view the Processor Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Processor Settings.
Processor Settings details
The Processor Settings screen details are explained as follows:
Option
Description
Logical Processor
Enables or disables the logical processors and displays the number of logical processors. If this option is set to
Enabled, the BIOS displays all the logical processors. If this option is set to Disabled, the BIOS displays only one
logical processor per core. This option is set to Enabled by default.
CPU Interconnect
Speed
Enables you to govern the frequency of the communication links among the CPUs in the system.
NOTE: The standard and basic bin processors support lower link frequencies.
Pre-operating system management applications 39