Owners Manual

Optional front bezel
An optional metal bezel is mounted on the front of the system to display system branding. A lock on the bezel is used to protect
unauthorized access to the hard drives. There are two versions of bezel available:
• With LCD panel
• Without LCD panel
For bezels with LCD panel, the system status can be viewed on the LCD panel. For more information, see LCD panel.
The LCD bezel is hot pluggable and can be used in any server of the same branding even if that system was originally not ordered with that
LCD bezel.
Removing the optional front bezel
The procedure to remove the optional front bezel with the LCD panel and the front bezel without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Unlock the bezel by using the bezel key.
2 Press the release button, and pull the left end of the bezel.
3 Unhook the right end, and remove the bezel.
Figure 14. Removing the optional front bezel with the LCD panel
Installing the optional front bezel
The procedure to install the optional front bezel with the LCD panel and the front bezel without the LCD panel is the same.
Prerequisite
Follow the safety guidelines listed in Safety instructions.
60
Installing and removing system components