Owners Manual

Steps

1 Locate and remove the bezel key.

NOTE: The bezel key is part of the LCD bezel package.

2 Align and insert the right end of the bezel onto the system.

3 Press the release button and t the left end of the bezel onto the system.

4 Lock the bezel by using the key.

Figure 15. Installing the optional front bezel with the LCD panel

System cover

System cover provides security for the entire system and also helps in maintaining proper air ow inside the system.

Removing the system cover

Prerequisites

1 Follow the safety guidelines listed in Safety instructions.

2 Turn o the system, including any attached peripherals.

3 Disconnect the system from the electrical outlet and disconnect the peripherals.

Steps

1 Using a at or a Phillips head screwdriver, rotate the latch release lock counter clockwise to the unlocked position.

2 Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system.

3 Hold the cover on both sides, and lift the cover away from the system.

Installing and removing system components