Owners Manual

Figure 40. Removing an expansion card from riser 2A
3 If you are removing the card permanently, install a metal ller bracket over the empty expansion slot opening and close the expansion
card latch.
NOTE
: You must install a ller bracket over an empty expansion card slot to maintain Federal Communications Commission
(FCC) certication of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and
airow inside the system.
Figure 41. Installing a ller bracket into riser 1A
4 Insert the expansion card latch into the slot to secure the bracket.
Next steps
1 Install the expansion card in to expansion card riser.
2 If you are removing the card permanently, install a metal ller bracket over the empty expansion slot opening and push the expansion
card latch.
86
Installing and removing system components