Owners Manual

Figure 43. Installing expansion cards into the expansion riser 1A
Figure 44. Installing an expansion card into the expansion riser 2A
Next steps
1 After installing a card into the riser 1, close the PCIe card holder latch. If applicable, close the PCIe guide after installing the expansion
card.
2 Follow the procedure listed in After working inside your system.
3 Install any device drivers required for the card as described in the documentation for the card.
IDSDM/vFlash card
The IDSDM/vFlash card combines the IDSDM and/or vFlash features into a single module.
88
Installing and removing system components