Owners Manual
Item Ports, panels, and slots Icon Description
• Status LED: Enables you to identify any failed hardware
components. There are up to ve status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see Status LED indicators.
• Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices. This feature
aggregates hardware or rmware inventory and various system
level diagnostic and error information that can be used in
troubleshooting the system. For more information, see the
Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
2 Video connector Enables you to connect a display device to the system. For more
information, see Technical specications.
3 Right control panel N/A Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.
4 USB port (optional)
The USB port is USB 3.0 compliant.
5 Hard drive slots N/A Enable you to install hard drives that are supported on your system.
For more information about hard drives, see Technical specications.
Left control panel view
Figure 3. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 2. Left control panel
Item Indicator or button Icon Description
1 Status LED indicators N/A Indicate the status of the system. For more information, see Status
LED indicators.
2 System health and system
ID indicator
Indicates the system health. For more information, see System health
and system ID indicator codes.
3 iDRAC Quick Sync 2
wireless indicator (optional)
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/rmware inventory and
XC640 Series and XC Core system overview 9