Owners Manual

Figure 45. Removing the optional IDSDM/vFlash card

Next step

Install the IDSDM/vFlash card.

Installing the IDSDM/vFlash card

Prerequisite

Follow the safety guidelines listed in Safety instructions.

Steps

1 Locate the IDSDM/vFlash connector on the system board.

To locate IDSDM/vFlash, see System board jumpers and connectors.

2 Align IDSDM/vFlash card with the connector on the system board.

3 Push IDSDM/vFlash card until it is rmly seated on the system board.

Installing and removing system components