Owners Manual

Next step

Install the integrated storage controller card.

Installing the integrated storage controller card

Prerequisite

Follow the safety guidelines listed in Safety instructions.

Steps

1 Angle the integrated storage controller card and align the end of the card with the controller card connector on the system board.

2 Lower the connector side of the integrated storage controller card into the integrated storage controller card connector on the system

board.

NOTE: Ensure that the slots on the system board align with the screw holes on the integrated storage controller card

connector.

Figure 51. Installing the integrated storage controller card

3 Route the integrated storage controller card cable along the wall of the system.

4 Align the screws on the integrated storage controller card cable with the screw holes on the connector.

5 Using Phillips #2 screwdriver, tighten the screws to secure the integrated storage controller card cable to the card connector on the

system board.

Installing and removing system components