Setup Guide

Broadcom OCM-CLI-LPE-UG124-100
52
Emulex OneCommand Manager Command Line Interface User Guide
Frame Size: 2112
Round Trip Latency: 1898 nanoseconds
Estimated Cable Length: 172 meters
=================================================================================
Test Phase Result Latency Local Errors Remote Errors
=================================================================================
Electrical Loopback Passed 127
Optical Loopback Passed 1898
Reverse Optical Loopback Skipped 0
Link Traffic Failed n/a
5.7.2 EchoTest
This command runs the Echo test on FC functions.
NOTE: The EchoTest command fails if the target WWPN does not support the ECHO ELS command.
Supported By
Linux and Windows
Syntax
EchoTest <WWPN Source> <WWPN Destination> <Count> <StopOnError> <Pattern>
Parameters
5.7.3 FcTraceRoute
This command issues an FC trace route request for the communication path between an FC initiator port and an FC target
port. (Not supported on LPe12000-series adapters.)
Supported By
Linux, Solaris, Windows, and Windows + CIM Provider on a VMware host
Syntax
FcTraceRoute <WWPN> <Target WWPN>
Parameters
WWPN Source The WWPN of the originating FC function.
WWPN
Destination
The WWPN of the destination (echoing) FC functions.
Count The number of times to run the test. Use 0 to run the test indefinitely.
StopOnError Checks if the test must be halted on error:
0 = No halt
1 = Halt on error
Pattern Hexadecimal data pattern to transmit (up to 8 characters).
WWPN The WWPN of the FC port to use as the FC trace route source.
Target WWPN The WWPN of the an FC target to use as the FC trace route endpoint.