Setup Guide

Broadcom OCM-CLI-LPE-UG124-100
72
Emulex OneCommand Manager Command Line Interface User Guide
Syntax
GetCimCred
Parameters
None.
5.12.6 GetVPD
This command displays the port’s vital product data (VPD).
Supported By
Linux, Solaris, Windows, and Windows + CIM Provider on a VMware host
Syntax
GetVPD <WWPN|MAC>
Parameters
5.12.7 ListHBAs
This command displays a list of the manageable Broadcom Emulex adapters found by local discovery. For a NIC port on a
PPC CNA, the MAC address is displayed instead of the WWPN. The node WWN and fabric WWN are not displayed. The
type of information listed can vary according to the adapter model.
Supported By
Linux, Solaris, Windows, and Windows + CIM Provider on a VMware host
Syntax
ListHBAs [local] [m=model] [pt=type] [down]
Parameters
5.12.8 RemoveHost
This command removes a host from the hosts file used for TCP/IP management in the OneCommand Manager application
GUI. The <host_address> can be an IP address that uses the IPv4 or IPv6 format, or it can be a host name.
Supported By
Linux, Solaris, Windows, and Windows + CIM Provider on a VMware host
WWPN The WWPN of an FC function.
MAC The MAC address of a NIC function.
local Displays only local adapters.
m=model Model filter. Append * to the end of the model name for a wildcard match. For example:
LPe32*.
pt=type The port type filter. Valid types are FC, NIC, and NVMe.
down Displays only the NIC functions of PPC CNAs on the local system in which the adapter's ARM processor has
stopped. This parameter detects adapters that might not respond to commands from the OneCommand
Manager CLI or application.