Setup Guide

Broadcom OCM-CLI-LPE-UG124-100
80
Emulex OneCommand Manager Command Line Interface User Guide
Support Requirements
 Mandatory:
– 0x1 = Arbitration
– 0x2 = Power management
– 0x4 = Temperature threshold
– 0x5 = Error recovery
– 0x7 = Number of queues
– 0xA = Write atomicity normal
– 0xB = Asynchronous event configuration
– 0x81 = Host identifier
 Mandatory only if reservations are supported by the controller; optional otherwise:
– 0x81 = Host identifier
 Mandatory only if reservations are supported by namespace management; optional otherwise:
– 0x82 = Reservation notification mask
– 0x83 = Reservation persistence
 Optional:
– 0x3 = LBA range type
– 0x6 = Volatile write cache
– 0xC = Autonomous power state transition
– 0xD = Host memory buffer
– 0xF = Keep alive timer
– 0x80 = Software progress marker
 Not supported:
– 0x8 = Interrupt coalescing
– 0x9 = Interrupt vector configuration
NOTE: To determine whether namespace management supports reservations, issue the nvme-id-ns command (see
Section 5.13.8, nvme-id-ns), and examine the value displayed in the Reservations field.
NOTE: If the raw parameter is not specified, the output provides all of the data available for the specified feature, in
human-readable format. The data includes all of the supported attribute values, such as current, saved, and
default, as well as any other attribute values returned in an additional data structure.
tempselect The temperature threshold value to be retrieved:
0x00 = Over-temperature threshold value for composite temperature
0x01 = Over-temperature threshold value for temperature sensor 1
0x02 = Over-temperature threshold value for temperature sensor 2
...
0x08 = Over-temperature threshold value for temperature sensor 8
0x10 = Under-temperature threshold value for composite temperature
0x11 = Under-temperature threshold value for temperature sensor 1
0x12 = Under-temperature threshold value for temperature sensor 2
...
0x18 = Under-temperature threshold value for temperature sensor 8