Users Guide

Broadcom DRVLin-UG128-100
85
Emulex Drivers for Linux User Guide
2001: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Unable to allocate memory for issuing the SLI_CONFIG_SPECIAL mailbox command.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2002: Error Could not grow rpi count
An error occurred because the RPI count could not be increased.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2004: Failed to allocate XRI.last XRITAG is <XRI> Max XRI is <MAX_XRI>, Used XRI is <USED_XRI>.
All XRIs are in use.
Data: None
Severity: Warning
Log: LOG_SLI
Action: None required.
2005 - Reducing Queues - FW resource limitation: WQ %d CQ %d EQ %d: min %d: IRQ %d HDWQ %d
Reducing queues due to resource limitations.
Data: None
Severity: Error
LOG: LOG_SLI
Action: None required.
2007: Only Limited Edition cmd Format supported <iocb.ulpCommand>
The SGL pages could not be unregistered from the firmware.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2008: Error <rc> posting all rpi headers
The RPI headers could not be posted to the firmware.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2009: Failed to allocate mbox for ADD_FCF cmd
Failed to allocate mailbox for ADD_FCF command.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2010: Resume RPI Mailbox failed status <status>, mbxStatus <mbx status>
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
Table 8: FC Error Log Messages and Their Descriptions (Continued)