Users Guide

Broadcom OCM-APP-LPE-UG124-100
45
Emulex OneCommand Manager Application
User Guide
Figure 17: Adapter Information Tab (Two-Port Adapter with Two-Lane Trunking Enabled)
To set trunking, perform these steps:
1. In the discovery-tree (Figure 4), select the supported adapter port whose trunking you want to set.
2. Select the Adapter Information tab (Figure 17).
3. Select Disabled, 2-lane, or 4-lane.
NOTE: On an LPe35004 adapter, if 2-lane port aggregation is selected, the four physical links on the adapter are divided
among two separate aggregated ports (Port 0 and Port 1). The two lowest numbered physical links form the first
aggregated port (Port 0), and the two highest number physical links form the second aggregated port (Port 1).
4. Click Apply. The Trunking Configuration dialog appears notifying you that your changes require a system reboot.
Figure 18: Trunking Configuration Dialog
5. Click OK and reboot the system.