Users Guide

Broadcom OCM-APP-LPE-UG124-100
60
Emulex OneCommand Manager Application
User Guide
NOTE: The link on the physical port must be up to delete a virtual port. The Remove Virtual Port button on the Virtual
Port tab is disabled if the link is down.
4. Select It is OK to delete the virtual port and click OK. You are notified that the virtual port is no longer available and
that it was removed from the discovery-tree (Figure 4).
5. Click OK.
7.8 Viewing Fabric Information
The Discovery Information tab (Figure 30) contains information about the selected fabric.
To view fabric discovery information, perform one of the following tasks:
– From the View menu, select Group Adapters by Fabric Address.
– From the toolbar, click the Group Adapters by Fabric Address button.
The Discovery Information tab is displayed (Figure 30).
Figure 30: Fabric Discovery Information
The following Discovery Information tab fields are displayed:
 Number of Hosts – The number of hosts discovered or seen by this host on the selected fabric.
 Number of Fabrics – The number fabrics identified during discovery.
 Number of Adapters – The number of adapters discovered by this host on the selected fabric.
 Number of Physical Ports – The number of discovered physical ports on this host that can be managed by this host.