Users Guide

Broadcom OCM-APP-LPE-UG124-100
61
Emulex OneCommand Manager Application
User Guide
7.9 Viewing Port Transceiver Information
When you select a port from the discovery-tree (Figure 4), the Transceiver Data tab (Figure 31) enables you to view
transceiver information, such as vendor name, serial number, and part number. If the adapter does not support some or all
of the transceiver data, the fields display N/A.
To view transceiver information, perform these steps:
1. Select the Host or Fabric view.
2. In the discovery-tree (Figure 4), select the port whose transceiver information you want to view.
3. Select the Transceiver Data tab (Figure 31).
Figure 31: Transceiver Data Tab
The following Transceiver Data tab fields are displayed:
 Module Attributes area:
– Vendor – The name of the vendor.
– Identifier/Type – The identifier value that specifies the physical device described by the serial information.
– Ext. Identifier – Additional information about the transceiver.
– Connector – The external optical or electrical cable connector provided as the media interface.
– Wavelength – The nominal transmitter output wavelength at room temperature.