Users Guide

Broadcom OCM-APP-LPE-UG124-100

Emulex OneCommand Manager Application

User Guide



Enable auto boot sector – Automatically defines the boot sector of the target disk for the migration boot process,

which applies only to HPE MSA1000 arrays. If no partition exists on the target, the default boot sector format is

63 sectors.

 Auto Scan – With auto scan enabled, the first device issues a name server inquiry. The boot device is the first D_ID,

LUN 0, or non-LUN 0 device returned, depending on the option you select. Only this device is the boot device, and it is

the only device exported to the multiboot menu; which appears at boot time. Auto scan is available only if none of the

eight boot entries is configured to boot through D_ID or WWPN. Select one of the following options:

– Disabled (default)

– Any First Device

– First LUN 0 Device

– First non-LUN 0 Device

 PLOGI Retry Timer (ms) – Sets the interval for the PLOGI retry timer. This option is especially useful for Tachyon-

based RAID arrays. Under very rare occasions, a Tachyon-based RAID array resets itself, and the port goes offline

temporarily in the loop. When the port comes back online, the PLOGI retry interval scans the loop to discover this

device. The default setting is None (0 ms). Select one of the following values:

– None (default)

–50 ms

– 100 ms

– 200 ms

7.18.2 EFIBoot Advanced Adapter Settings Dialog

Use the EFIBoot Advanced Adapter Settings dialog (Figure 53) to configure the advanced settings for the selected

EFIBoot adapter.

NOTE: When x86 settings are changed, the same changes are also made to EFI. Conversely, when EFI settings are

changed, the changes are also made to x86.

Figure 53: EFIBoot Advanced Adapter Settings Dialog