Setup Guide

Broadcom LPe-HBA-IG128-100-2CS
9
Emulex Fibre Channel Host Bus Adapters Installation Guide
Figure 8: Installing an Optical Transceiver
2. Insert an appropriate optical cable into the LC connectors on the HBA.
Figure 9: Connecting a Fiber Optic Cable
3. Connect the other end to the FC device.
You are ready to apply power to the system.
2.4 Applying Power
To apply power:
1. Verify that the HBA is securely installed in the system.
2. Verify that the correct media is attached.
3. Plug in the computer and turn it on.
4. Watch the LEDs for POST results.