Users Guide

Broadcom OCM-VM-LPe-UG124-101
107
Emulex OneCommand Manager for VMware vCenter User Guide
Driver Parameters group –
Commands to enable an ESXi
host to read and manage driver
parameters for the host and an
Emulex adapter.
 driverconfig
 getdriverparamsglobal
 saveconfig
 setdriverparam
 setdriverparamdefaults
driverconfig – Sets all driver parameters to the values in the
.dpv file on an ESXi host.
getdriverparamsglobal – Lists global driver parameters for
a port.
saveconfig – Saves an adapter’s driver parameters to a file.
setdriverparam – Sets a driver parameter for a port and
designates the scope of the change.
setdriverparamdefaults – Restores all driver parameters
to the default value, at the port or global level (temporarily or
permanently).
Collect Dump group –
Commands to manage dump
files for a selected adapter.
Dump files are useful when
troubleshooting.
 deletedumpfiles
 dump
 getdumpdirectory
 getdumpfilenames
 getretentioncount
 setdumpdirectory
 setretentioncount
deletedumpfiles – Deletes all diagnostic dump files for a port.
dump - Performs a dump of a local port.
getdumpdirectory – Shows a dump file directory for a port in
the host.
getdumpfilenames – Lists all dump file names for a port.
getretentioncount – Shows the maximum number of
diagnostic dump files to keep for a port.
setdumpdirectory – Sets the dump directory for all adapters
in the server.
setretentioncount – Specifies the maximum number of
diagnostic dump files for the adapter.
Firmware group – Commands
to update the firmware, view the
firmware parameters, and
change the firmware
parameters on an Emulex
adapter or port.
 firmwareupdate
 getfwparams
 setfwparams
firmwareupdate – Updates the firmware on Emulex adapters
in a VMware cluster or ESXi host.
getfwparams – Displays the available firmware parameters,
and their ranges, for the specified port.
setfwparams – Assigns new firmware parameter values to the
specified port.
Target and LUNs group –
Commands to enable an ESXi
host to read targets and LUNs
attached to the port on an
Emulex adapter.
 getlunlist
 targetmapping
getlunlist – Lists the LUNs attached to the target of the
specified port.
targetmapping – Lists the targets attached to the specified
port.
Trunking group – Commands to
view and configure trunking.
 gettrunkinfo
 settrunkmode
gettrunkinfo – Shows the trunking configuration for the
specified port.
settrunkmode – Configures trunking for the specified port.
Virtual Machines group –
Commands to enable an ESXi
host to find virtual machines
and their attached ports.
 listvms
 listvports
listvms – Lists all virtual machines and their information for all
manageable ports.
listvports – Lists all virtual ports on the specified physical
port.
WWWN Management group –
Commands to enable an ESXi
host to read and manage the
WWN details for the port on an
Emulex adapter.
 changewwn
 getwwncap
 readwwn
 restorewwn
changewwn – Changes the WWN of the port.
getwwncap – Lists the WWN capabilities of the port.
readwwn – Lists the WWN details of the port and category.
restorewwn – Restores the WWN value of the port.
Table 4: Help Groups and Supported CLI Commands (Continued)
Help Group Supported CLI Commands Command Descriptions (Continued)