Users Guide

Broadcom OCM-VM-LPe-UG124-101

121

Emulex OneCommand Manager for VMware vCenter User Guide

12.3.6 Collect Dump Commands

The Collect Dump commands initiate a dump on a local port, show the dump file for the port on the host, show the diagnostic

dump file retention count set on a port, and specify the maximum number of diagnostic dump files for the adapter.

12.3.6.1 deletedumpfiles

This command deletes all diagnostic dump files for a given port.

Syntax

elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password> h=<esx_host> deletedumpfiles <WWPN>

Parameters

12.3.6.2 dump

This command performs a dump on a local port. The dump file is placed in the dump directory with the following file name

format:

If the command is successful, the following message is displayed:

Dump Successful.

NOTE: Because this command dumps memory, it can take time while generating large files.

Syntax

elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password> h=<esx_host> dump <WWPN>

Parameters

v The vCenter server IP address.

u The user name for the vCenter server.

p The user password for the vCenter server.

h The IP address of the ESXi host.

WWPN The WWPN of the port.

v The vCenter server IP address.

u The user name for the vCenter server.

p The user password for the vCenter server.

h The IP address of the ESXi host.

WWPN The WWPN of the port.

Options Additional options are available under the direction of Broadcom Technical Support.