Users Guide

Broadcom OCM-VM-LPe-UG124-101
131
Emulex OneCommand Manager for VMware vCenter User Guide
Parameters
12.3.8.5 setdriverparam
This command sets the driver parameter at the port or global level, either permanently or temporarily, for the specified port.
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP> setdriverparam <WWPN>
<Flag1> <Flag2> <Param> <Value>
Parameters
12.3.8.6 setdriverparamdefaults
This command restores the driver parameter to the default value at the port or global level, either permanently or temporarily,
for the specified port.
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP> setdriverparamdefaults
<WWPN> <Flag1> <Flag2>
Parameters
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of the port.
FileName The name of the local .dpv file.
Flag Valid types are:
G = Make change global (all adapters on this host).
N = Make change non-global (adapter-specific).
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of a port.
Flag1 L = Local (all adapters on this host).
G = Global (all adapters on this host).
Flag2 P = Permanent (persists across reboot).
T = Temporary.
Param The name of the driver parameter.
Value The value of the driver parameter.
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of a port.