Users Guide

Broadcom OCM-VM-LPe-UG124-101
134
Emulex OneCommand Manager for VMware vCenter User Guide
12.3.10.2 targetmapping
This command displays the targets attached to the specified port.
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP> targetmapping <WWPN>
Parameters
12.3.11 Trunking Commands
The Trunking commands enable you to view and configure trunking.
NOTE:
 Trunking is supported only on LPe35002 and LPe35004 adapters.
 D_Port testing is not available when trunking is enabled.
 FA-PWWN is not available when trunking is enabled.
 Trunking is not supported at 8 Gb/s, and the link will not come up at this speed.
 Before you configure trunking on the Emulex adapter, follow the instructions from Brocade for configuring
trunking on the switch.
12.3.11.1 gettrunkinfo
This command displays the trunking configuration for the specified port.
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP> gettrunkinfo <WWPN>
Parameters
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of the port.
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of a port.