Users Guide

Broadcom OCM-VM-LPe-UG124-101
137
Emulex OneCommand Manager for VMware vCenter User Guide
12.3.13.3 readwwn
This command displays the WWN details of the specified port and category.
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP>
getwwncap <WWPN> [ReadType]
Parameters
12.3.13.4 restorewwn
This command restores the WWN value of the specified port.
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_pwd> h=<ESXhostIP> restorewwn <WWPN>
<RestoreType>
Parameters
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of a port.
ReadType Valid types are:
0 = Volatile.
1 = Non-volatile.
2 = Factory default.
3 = Current.
4= Configured.
v The vCenter server IP address.
u The user name for the vCenter server.
p The user password for the vCenter server.
h The IP address of the ESXi host.
WWPN The WWPN of a port.
RestoreType Valid types are:
0 = Restore default WWNs.
1 = Restore NVRAM WWNs.