Users Guide

Broadcom BT-FC-LPE-UG124-100
20
Emulex Boot for the Fibre Channel Protocol User Guide
Figure 1: Adapter Listing Screen
2. Select the adapter to configure and press Enter.
The main configuration menu is displayed (Figure 2).
Figure 2: Main Configuration Menu
Under normal circumstances, you would first configure boot devices using the BIOS utility (see Section 4.3, Configuring Boot
Devices). However, in the following two situations, you must perform the indicated procedure first:
 The adapter is not enabled to boot from SAN: You must enable the adapter’s BIOS to boot from SAN (see
Section 4.2.1, Enabling an Adapter to Boot from SAN).
 If you want to use a topology other than the default, you must change the topology setting before configuring boot
devices (see Section 4.4.3, Changing the Topology).