Users Guide

Broadcom BT-FC-LPE-UG124-100
23
Emulex Boot for the Fibre Channel Protocol User Guide
3. Select 00 and press Enter to clear the selected boot entry, or select the WWPN or DID of a device to configure.
Figure 6: Starting LUN Offset Screen
4. If you select a device, you are prompted for the starting LUN. Select the starting LUN, by using the up and down arrow
keys (Figure 6). The starting LUN can be any number from 0 to 255.
Figure 7: LUN Listing Screen
You can define 256 LUNs per adapter. The screen shows only 8 LUNs per page, from the starting LUN offset, up to
256 consecutive LUNs.
5. Use the arrow key up and down to select the LUN you want to setup as a boot device.
The Boot Devices menu (Figure 8) is displayed.