Manualshelf

Users Guide

ManualsBrandsDell ManualsComputer HardwareEmulex Family of Adapters
31323334353637383940
Broadcom DRVLin-LPe-UG124-100
35
Emulex Drivers for Linux User Guide
Information similar to the following is displayed:
NVME-SUBSYS0 - NQN=NQN.2014-08.ORG.NVMEXPRESS:NVMF:UUID:19D48A6D-3644-4F65-8046-80BD88FE45A6
\
+-
NVME0 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F1F:PN-
0X100000109B346F1F
+- NVME3 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F20:PN-
0X100000109B346F20
NVME-SUBSYS1 - NQN=NQN.2014-08.ORG.NVMEXPRESS:NVMF:UUID:2C6D862F-B77E-43B1-B345-7F990125088E
\
+- NVME1 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F1F:PN-
0
X100000109B346F1F
+- NVME6 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F20:PN-
0X100000109B346F20
NVME-SUBSYS2 - NQN=NQN.2014-08.ORG.NVMEXPRESS:NVMF:UUID:4BBBD877-6DE2-4A67-AD56-E0333E2437B5
\
+- NVME2 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F1F:PN-
0
X100000109B346F1F
+- NVME7 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F20:PN-
0X100000109B346F20
NVME-SUBSYS3 - NQN=NQN.2014-08.ORG.NVMEXPRESS:NVMF:UUID:C8DA7263-FEFE-4563-A14C-A9F0362DCB03
\
+- NVME5 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F1F:PN-
0
X100000109B346F1F
+- NVME9 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F20:PN-
0X100000109B346F20
NVME-SUBSYS4 - NQN=NQN.2014-08.ORG.NVMEXPRESS:NVMF:UUID:5F1D7788-FAB1-45CF-AF9C-D30DC9A9CE89
\
+- NVME4 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F1F:PN-
0
X100000109B346F1F
+- NVME8 FC TRADDR=NN-0X20000090FA942E16:PN-0X10000090FA942E16 HOST_TRADDR=NN-0X200000109B346F20:PN-
0X100000109B346F20
NOTE: For additional information on multipathing, see Appendix C, Native NVME Multipathing.
5. You can run the lsblk command on the initiator to display all the block devices, including newly discovered ones, by
typing the following command:
lsblk
Information similar to the following is displayed:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 136.7G 0 disk
├─sda1 8:1 0 2G 0 part
├─sda2 8:2 0 40G 0 part
├─sda3 8:3 0 94.7G 0 part
└─3600508b1001037383941424344450400 254:0 0 136.7G 0 mpath
├─3600508b1001037383941424344450400-part1 254:1 0 2G 0 part [SWAP]
├─3600508b1001037383941424344450400-part2 254:2 0 40G 0 part /var/opt
└─3600508b1001037383941424344450400-part3 254:3 0 94.7G 0 part /home
sdb 8:16 0 3G 0 disk
└─3600000e00d2a0000002a017300340000 254:4 0 3G 0 mpath
sdc 8:32 0 3G 0 disk
└─3600000e00d2a0000002a017300350000 254:5 0 3G 0 mpath