Users Guide

Broadcom DRVLin-LPe-UG124-100
36
Emulex Drivers for Linux User Guide
NOTE: The /dev/sde and /dev/sdf block devices, which were previously referred to on the NVMe target system, are
now discovered by the NVMe initiator system, and they appear as the NVMe block devices /dev/nvme0n1 and
/dev/nvme0n2.
4.2 Emulex Support for NVMe CLI Commands
The following operating systems include many native NVMe CLI commands for initiators:
 RHEL 8.0 and later
 RHEL 7.6 and later
 SLES 15 and later
 SLES 12 SP3 and later
Of these, Emulex has tested, and thus supports, only the following commands at this time:
 list
 connect-all
 connect
 gen-hostnqn
 list-subsys (SLES 15 and SLES 15 SP1 only)
Documentation for these commands is available with the operating system.
sdd 8:48 0 3G 0 disk
└─3600000e00d2a0000002a017300360000 254:6 0 3G 0 mpath
nvme0n1 259:0 0 3G 0 disk
nvme0n2 259:1 0 3G 0 disk