Users Guide
Broadcom DRVLin-LPe-UG124-100
41
Emulex Drivers for Linux User Guide
0125: FDISC Failed (x%x). Fabric out of resources
The fabric rejected an FDISC because the switch cannot support additional virtual ports.
Data: lsRjtError
Severity: Error
Log: Always
Action: Reconfigure the switch to support more NPIV logins. If this issue persists, contact Broadcom Technical Support.
0126: FDISC failed ulpStatus ulpWord4
Data: lsRjtError
Severity: Error
Log: Always
Action: Reconfigure the switch to support more NPIV logins. If this issue persists, contact Broadcom Technical Support.
0127: ELS timeout
An ELS IOCB command was posted to a ring and did not complete within ULP timeout seconds.
Data: (1) elscmd (2) remote_id (3) ulpcommand (4) ulpIoTag
Severity: Error
Log: Always
Action: If no ELS command is going through the adapter, reboot the system. If the issue persists, contact Broadcom Technical Support.
0133: PLOGI: no memory for reg_login
Memory allocation error.
Data: (1) nlp_DID (2) nlp_state (3) nlp_flag (4) nlp_rpi
Severity: Error
Log: LOG_ELS
Action: Memory allocation error. Check system resources. Unload unused modules.
0134: PLOGI cannot issue reg_login
The ELS PLOGI mailbox command has failed.
Data: (1) nlp_DID (2) nlp_state (3) nlp_flag (4) nlp_rpi
Severity: Error
Log: LOG_ELS
Action: Check the port and switch configuration.
0135: cannot format reg_login
Could not allocate an RPI or DMA buffer for the mailbox command.
Data: (1) nlp_DID (2) nlp_state (3) nlp_flag (4) nlp_rpi
Severity: Error
Log: LOG_ELS
Action: None required.
0136: PLOGI completes to NPort <DID> completion
A PLOGI has completed for which there is no NDLP.
Data: (1) ulpStatus (2) ulpWord[4]
Severity: Error
Log: LOG_ELS
Action: None required.
0137: No retry ELS command <ELS_CMD> to remote
Data: (1) ulpStatus (2) ulpWord[4]
Severity: Error
Log: LOG_ELS
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)