Users Guide

Broadcom DRVLin-LPe-UG124-100
55
Emulex Drivers for Linux User Guide
0336: Rsp Ring <ringno> error: IOCB
An IOCB error has occurred on the specified ring.
Data: (1) ulpWord[0], (2) ulpWord[1], (3) ulpWord[2], (4) ulpWord[3], (5) ulpWord[4], (6) ulpWord[5], (7) irsp+6, (8) irsp+7
Severity: Warning
Log: LOG_SLI verbose
Action: If this issue persists, check the targets. If the targets are not the problem, report the error to Broadcom Technical Support.
0340: Adapter temperature is OK now
Adapter temperature has reverted to normal range.
Data: Temperature in Celsius
Severity: Error
Log: LOG_TEMP verbose
Action: No action needed, informational.
0341: Ring <ringno> Cannot find buffer for an unsolicited iocb tag <un.ulpWord[3]>
No more preallocated buffers are available to handle unsolicited buffers.
Data: None
Severity: Error
Log: LOG_SLI
Action: Ensure that this port is not being managed by multiple ports.
0342: Ring <ringno> Cannot find buffer for an unsolicited iocb tag <unsli3.sli3Words>
This is a multiple IOCB unsolicited command, and sufficient buffer space cannot be allocated for it.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
0343: Ring <ringno> Cannot find buffer for an unsolicited iocb tag <un.ulpWord[3]>
No more preallocated buffers are available to handle unsolicited buffers.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
0344: Ring <ringno> Cannot find buffer for an unsolicited iocb tag <unsli3.sli3Words[7]>
No more preallocated buffers are available to handle unsolicited buffers.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
0345: Resetting board due to mailbox timeout iocb. tag 0x%x
A mailbox command failed to complete. The driver is resetting the port.
Data: None
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: If the mailbox command fails again, set the lpfc_log_verbose to LOG_MBOX and retry.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)