Users Guide

Broadcom DRVLin-LPe-UG124-100
62
Emulex Drivers for Linux User Guide
0397:The mbuf allocation failed
The asynchronous link event handler could not allocate DMA for the READ_LA mailbox command.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
0398 Invalid link fault code: <hex link_fault>
The attempt to read the link attention register returned an unknown value.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
0399 Invalid link attention type: <hex link_type>
The READ_LA mailbox command returned an invalid link type.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
0401: Ignoring change to nodev_tmo because devloss_tmo is set
Attempting to change the nodev timeout when the devloss has already been set.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
0402:Cannot find virtual addr for buffer tag on ring <ringno>
A DMA buffer is unavailable for this unsolicited command.
Data: (1) tag (2) next (3) prev (4) postbufq_cnt
Severity: Error
Log: LOG_INIT
Action: None required.
0404: lpfc_devloss_tmo attribute cannot be set to <val>, allowed range is [<LPFC_MIN_DEVLOSS_TMO>,
<LPFC_MAX_DEVLOSS_TMO>]
Attempt to set the devloss timeout value is outside the allowed range.
Data: None
Severity: Error
Log: LOG_INIT
Action: Set the devloss timeout between the minimum and maximum devloss range.
0405: lpfc_link_speed attribute cannot be set to %d, allowed values are ["LPFC_LINK_SPEED_STRING"]
Attempt to set the link speed value is outside the allowed range.
Data: None
Severity: Error
Log: LOG_INIT
Action: Set the link speed between 0 and the maximum.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)