Users Guide

Broadcom DRVLin-LPe-UG124-100
67
Emulex Drivers for Linux User Guide
0453: Adapter failed to init, mbxCmd <mbxCommand> READ_CONFIG, mbxStatus <mbxStatus>
Adapter initialization failed when issuing a READ_CONFIG mailbox command.
Data: None
Severity: Error
Log: Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the error to Broadcom Technical Support.
0454: Adapter failed to init, mbxCmd <mbxCommand> INIT_LINK, mbxStatus <mbxStatus>
Adapter initialization failed when issuing an INIT_LINK mailbox command.
Data: None
Severity: Error
Log: Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the error to Broadcom Technical Support.
0456: Adapter failed to issue ASYNCEVT_ENABLE mbox status x%x
The mailbox command to enable an asynchronous event notification failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: Ensure the adapter firmware is current. Reload the driver.
0457: Adapter Hardware Error
The driver received an interrupt indicating a possible hardware issue.
Data: (1) status (2) status1 (3) status2
Severity: Error
Log: Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the error to Broadcom Technical Support.
0458: Bring adapter online
The FC driver received a request to bring the adapter online. This issue might occur when running lputil.
Data: None
Severity: Warning
Log: LOG_INIT verbose
Action: None required.
0459: Adapter heartbeat failure, taking this port offline.
The Heartbeat mailbox command failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: Ensure that the adapter firmware is current. Reload the driver.
0460: Bring adapter offline
The FC driver received a request to bring the adapter offline. This issue might occur when running lputil.
Data: None
Severity: Warning
Log: LOG_INIT verbose
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)