Users Guide
Broadcom DRVLin-LPe-UG124-100
74
Emulex Drivers for Linux User Guide
0545: lpfc_create_static_vport bad information header 0x%x 0x%x\n"\, le32_to_cpu(vport_info->signa-
ture), le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
Invalid information header; the signature or revision is invalid.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
0546: lpfc_create_static_vport failed to create vport
Failed to create a vPort.
Data: None
Severity: Warning
Log: LOG_INIT
Action: None required.
0582: Error <rc> during sgl post operation
The SGL post operation failed.
Data: None
Severity: Error
Log: LOG_MBOX, LOG_IP verbose
Action: None required.
0602: Failed to allocate CQ_EVENT entry
Failed to allocate a CQ_EVENT entry.
Data: None
Severity: Error
Log: LOG_ SLI
Action: None required.
0603: Invalid work queue CQE subtype (x%x)\n", cq-<subtype>
Invalid work queue CQE.
Data: None
Severity: Error
Log: LOG_ SLI
Action: None required.
0700: Bus Reset on target <i> failed
The bus reset for the specified target failed.
Data: None
Severity: Error
Log: LOG_ FCP
Action: None required.
0704: At limitation of <total> preallocated command buffers
The maximum number of command buffers have already been allocated.
Data: None
Severity: Warning
Log: LOG_FCP verbose
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)