Users Guide

Broadcom DRVLin-LPe-UG124-100
76
Emulex Drivers for Linux User Guide
0722: Target Reset rport failure: rdata <rdata>
The reset of the target failed.
Data: None
Severity: Error
Log: LOG_FCP
Action: None required.
0723: SCSI layer issued Target Reset (%d, %d)
The SCSI layer issued a target reset.
Data: None
Severity: Error
Log: LOG_FCP
Action: None required.
0724: I/O flush failure for context <“LUN”,”TGT”,”HOST”,”Unknown”>: cnt <cnt>
The I/O flush to the LUN, target, or host failed.
Data: None
Severity: Error
Log: LOG_FCP
Action: None required.
0727: TMF <cmd> to TGT <TGT#> LUN <LUN#> failed (<ulpStatus>, <ulpWord[4]>)
The task management command failed.
Data: None
Severity: Error
Log: LOG_FCP
Action: None required.
0729: FCP cmd <cmnd> failed <target>/<lun> status: <status> result: <result>
The specified device failed an FCP command.
Data: (1) ulpContext (2) iotag
Severity: Warning
Log: LOG_FCP verbose
Action: Check the state of the target in question.
0730: FCP command failed: RSP
The FCP command failed with a response error.
Data: (1) resp_info (2) scsi_status (3) ResId (4) SnsLen (5) RspLen (6)rspInfo3
Severity: Warning
Log: LOG_FCP verbose
Action: Check the state of the target in question.
0734: FCP read check error
The issued FCP command returned a read check error.
Data: (1) fcpDl (2) rspResId (3) fcpi_parm (4) cmd[0]
Severity: Warning
Log: LOG_FCP verbose
Action: Check the state of the target in question.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)