Users Guide

Broadcom DRVLin-LPe-UG124-100
77
Emulex Drivers for Linux User Guide
0735: FCP Read Check Error and Underrun Data
HBA reported under run from storage array.
Data: (1) vpi (2) fcpDI (3) res_id (4) fcpi_parm
Severity: Warning
Log: LOG_FCP_ERROR verbose
Action: No action needed, informational.
0748: Abort handler timed out waiting for abort to complete:ret <status> D <target id> LUN <lun id>
The abort handler timed out waiting for abort to complete.
Data: None
Severity: Error
Log: Always
Action: None required.
0749: SCSI layer issued abort device
The SCSI layer aborted a device.
Data: (1) ret, (2) id, (3) lun, (4) snum
Severity: Warning
Log: LOG_FCP verbose
Action: None required.
0915 Register VPI failed:<mbxStatus>
Could not register the VPI.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
1019: Request tranid <tran_id> timed out
A transaction with storage array could not complete due to timeout.
Data: (1) tran_id
Severity: Warning
Log: LOG_SECURITY verbose
Action: Software driver warning. If this issue persists, report these errors to Broadcom Technical Support.
1021: ERROR: attempted to queue security work, when no workqueue created
Driver encountered missing queue required for processing security information.
Data: None
Severity: Error
Log: LOG_SECURITY
Action: Software driver error. If this issue persists, report these errors to Broadcom Technical Support.
1022: Security request does not exist
A security request operation failed because no match was found for such request.
Data: None
Severity: Warning
Log: LOG_SECURITY
Action: Software driver warning. If this issue persists, report these errors to Broadcom Technical Support.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)