Users Guide

Broadcom DRVLin-LPe-UG124-100
79
Emulex Drivers for Linux User Guide
elx_mag1036: Authentication transaction reject - re-auth request reason <reason> exp <explanation>
An authentication was rejected and requested again due to reason as displayed with explanation.
Data: (1) reason (2) explanation.
Severity: Error
Log: LOG_SECURITY
Action: Software driver error. If this issue persists, report errors to Broadcom Technical Support.
1037: Authentication transaction reject - restarting authentication, reason <reason> exp <explana-
tion>
An authentication process was rejected then restarted and an authentication requested was again due to reason as displayed with the
explanation.
Data: (1) reason (2) explanation.
Severity: Error
Log: LOG_SECURITY
Action: Software driver error. If this issue persists, report errors to Broadcom Technical Support.
1039: Not Expecting Reply - rejecting. State <state>
An unanticipated reply was received during authentication and was subsequently rejected.
Data: (1) auth_state
Severity: Error
Log: LOG_SECURITY
Action: Software driver error. If this issue persists, report errors to Broadcom Technical Support.
1040: Bad Reply trans_id- rejecting. Trans_id < trans_id > Expecting: < trans_id>
Unexpected transaction id was received during authentication and was subsequently rejected.
Data: (1) auth_state
Severity: Error
Log: LOG_SECURITY
Action: Software driver error. If this issue persists, report errors to Broadcom Technical Support.
1043: Authentication LS_RJT
The authentication request was rejected.
Data: None
Severity: Error
Log: LOG_ELS
Action: None required.
1045: Issue AUTH_NEG failed Status:%x
The authentication negotiation failed.
Data: None
Severity: Error
Log: LOG_ELS
Action: None required.
1048: Issue AUTH_REJECT failed
Could not issue the reject for the authentication request.
Data: None
Severity: Error
Log: LOG_ELS
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)