Users Guide

Broadcom DRVLin-LPe-UG124-100
92
Emulex Drivers for Linux User Guide
1837: Vport_delete failed: Cannot delete static vport
Static vPorts cannot be deleted.
Data: None
Severity: Error
Log: LOG_VPORT
Action: None required.
1838: Failed to INIT_VPI on vpi <vpi> status <rc>
Failed to INIT_VPI.
Data: None
Severity: Error
Log: LOG_VPORT
Action: None required.
2000: Failed to allocate mbox for read_FCF cmd
Failed to allocate mailbox for READ_FCF command.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2001: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Unable to allocate memory for issuing the SLI_CONFIG_SPECIAL mailbox command.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2002: Error Could not grow rpi count
An error occurred because the RPI count could not be increased.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2004: Failed to allocate XRI.last XRITAG is <XRI> Max XRI is <MAX_XRI>, Used XRI is <USED_XRI>.
All XRIs are in use.
Data: None
Severity: Warning
Log: LOG_SLI
Action: None required.
2005: Unable to deregister pages from HBA: <rc>
The SGL pages could not be unregistered from the firmware.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)