Users Guide

Broadcom DRVLin-LPe-UG124-100
93
Emulex Drivers for Linux User Guide
2007: Only Limited Edition cmd Format supported <iocb.ulpCommand>
The SGL pages could not be unregistered from the firmware.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2008: Error <rc> posting all rpi headers
The RPI headers could not be posted to the firmware.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2009: Failed to allocate mbox for ADD_FCF cmd
Failed to allocate mailbox for ADD_FCF command.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2010: Resume RPI Mailbox failed status <status>, mbxStatus <mbx status>
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2011: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2012: Mailbox failed , mbxCmd <mbx_cmd> READ_CONFIG, mbxStatus <mbx status>
The READ_CONFIG mailbox command failed.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2013: Could not manually add FCF record 0, status <rc>
Could not add an FCF record to the FCF list.
Data: None
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2014: Invalid command <iocb.ulpCommand>
The IOCB command is invalid.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)