Users Guide

Broadcom DRVLin-LPe-UG124-100
94
Emulex Drivers for Linux User Guide
2015: Invalid CT %x command <iocb.ulpCommand>
Invalid command type in the IOCB is not supported.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2017: REG_FCFI mbxStatus error <mbx status> HBA state <port_state>
The REG_FCFI mailbox command failed.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2018: REG_VFI mbxStatus error <mbx status> HBA state <port_state>
The REG_VFI mailbox command failed.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2020: Failed to allocate mbox for ADD_FCF cmd
Failed to allocate mailbox for ADD_FCF command.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2022: VPI Mailbox failed status <status>, mbxStatus <mbxStatus>
The INIT-VPI mailbox command failed.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2401: Failed to allocate memory for ELS XRI management array of size <els_xri_cnt>.
Initialization failed to allocate memory for the ELS XRI management array.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2500: EQ_CREATE mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to create the event queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)