Users Guide

Broadcom DRVLin-LPe-UG124-100
98
Emulex Drivers for Linux User Guide
2520: NOP mailbox command failed status x%x add_status x%x mbx status x%x, shdr_status, shdr_add_sta-
tus, rc.
The NOP mailbox command failed.
Data: None
Severity: Warning
Log: LOG_INIT
Action: None required.
2521: READ_FCF_RECORD mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx
The READ_FCF_RECORD mailbox command failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2523: Allocated DMA memory size (<alloc_len>) is less than the requested DMA memory size (<req_len>)
The ADD_FCF_RECORD mailbox command failed to retrieve the length required from the firmware.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2524: Failed to get the non-embedded SGE virtual address
The READ_FCF_RECORD mailbox command could not retrieve the SGE that was requested.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2527: Failed to allocate non-embedded SGE array.
Failed to allocate the nonembedded SGE array.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2528: Mailbox command <vpi> cannot issue
The mailbox command could not be issued because the mailbox interrupt is disabled.
Data: (1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2529: Mailbox command <vpi> cannot issue
Data: (1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)