Users Guide

Broadcom DRVLin-LPe-UG124-100
99
Emulex Drivers for Linux User Guide
2530: Mailbox command <vpi> cannot issue
The SLI layer in the driver is inactive.
Data: (1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2531: Mailbox command <cpi> cannot issue
Data: (1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2532: Mailbox command <vpi> (<mbxCommand>) cannot issue
The mailbox bootstrap code detected that the SLI layer is active.
Data: (1) sli4_mbox_opcode (2) sli_flag,(3) MBX_POLL
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2533: Mailbox command <vpi> (<mbxCommand>) cannot issue
Data: (1) sli4_mbox_opcode (2) sli_flag (3) MBX_NOWAIT
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2535: Unsupported RQ count. (<entry_count>)
The RQ ring can only be 512, 1024, 2048, or 4096.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2536: Unsupported RQ count. (<entry_count>)
The RQ ring can only be 512, 1024, 2048, or 4096.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2537: Receive Frame Truncated!
The receive unsolicited handler detected a truncated frame.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2539: Dropped frame rctl:%s type:%s\n
An unsupported frame was received by the port and dropped.
Data: (1) rctl_names[fc_hdr->fh_r_ctl], (2) type_names[fc_hdr->fh_type]
Severity: Error
Log: Always
Action: No action needed, informational.
Table 7: LPFC Error Log Messages and Their Descriptions (Continued)