Users Guide

Broadcom NVMe-FC-120UG-100
15
Emulex NVMe over Fibre Channel User Guide
Parameters
Example
hbacmd listhbas pt=nvme
Information similar to the following is displayed:
Manageable HBA List
Port WWN : 10:00:00:90:fa:94:23:c6
Node WWN : 20:00:00:90:fa:94:23:c6
Fabric Name : 00:00:00:00:00:00:00:00
Flags : 8000e300
Host Name : APPDEV100
Mfg : Emulex Corporation
Serial No. : TSN-0090fa9423c6
Port Number : 0
Mode : Initiator
PCI Bus Number : 36
PCI Function : 0
Port Type : FC+NVMe
Model : LPe32002-M2
Port WWN : 10:00:00:90:fa:94:23:c7
Node WWN : 20:00:00:90:fa:94:23:c7
Fabric Name : 00:00:00:00:00:00:00:00
Flags : 8000e300
Host Name : APPDEV100
Mfg : Emulex Corporation
Serial No. : TSN-0090fa9423c6
Port Number : 1
Mode : Initiator
PCI Bus Number : 36
PCI Function : 1
Port Type : FC+NVMe
Model : LPe32002-M2
4.2.1.3 The AllNodeInfo Command
A new parameter has been added to the AllNodeInfo command to filter the display of nodes to SCSI (FCP)-only or to
NVMe-only nodes. If a filter option is not specified in the command line, the output lists both SCSI and NVMe nodes.
Syntax
hbacmd AllNodeInfo <WWPN> [S|N]
local Displays only local adapters.
m=model The model filter. Append * to the end of the model name for a wildcard match. For example, LPe32*.
pt=type The port type filter. Valid types are FC and NVMe.
down Not applicable.