Users Guide

Broadcom NVMe-FC-120UG-100

Emulex NVMe over Fibre Channel User Guide

Support Requirement

 Mandatory

Example

hbacmd nvme-list 10:00:00:90:fa:5d:05:a9

Information similar to the following is displayed:

Discovered NVMe Subsystems for 10:00:00:90:fa:5d:05:a9

NVMe Qualified Name : nqn.2014-08.com.example:nvme.host.sys.xyz

Port WWN : 50:06:01:60:90:20:5C:38

Controller ID : 0x0001

Model Number : NVMfxx999

Serial Number : 0123456789

Firmware Version : 1.2.0.1

Total Capacity : 1 TB

Unallocated Capacity: 500 GB

Configured NVMe Subsystems for 10:00:00:90:fa:5d:05:a9

NVMe Qualified Name : nqn.2014-08.com.example:nvme.host.m32

Port WWN : 30:16:01:62:90:21:CC:41

Controller ID : 0x0001

Model Number : NVMf0103

Serial Number : 0123456789

Firmware Version : 1.2.0.5

Total Capacity : 2 TB

Unallocated Capacity: 400 GB

4.2.2.4 The nvme-list-ctrl Command

The nvme-list-ctrl command displays the controllers for a specified NVMe target.

Syntax

hbacmd nvme-list-ctrl <WWPN> <Target WWPN> <NQN> [NSID]

Parameters

NOTE: Only the controllers on the subsystem specified in the command line are displayed. Controllers for other

subsystems are not displayed, even if they reside within the same NVME target WWPN.

Support Requirement

 Optional

Example

hbacmd nvme-list-ctrl 10:00:00:90:fa:5d:05:a9 50:06:01:60:90:20:5C:38 nqn.2014-

08.com.example:nvme.host.sys.xyz

WWPN The WWPN of the FC initiator port.

Target WWPN The WWPN of an FC port on an NVMe-capable device.

NQN The qualified name of the NVMe subsystem.

NSID The namespace identifier (optional), in hexadecimal. Use it to list only controllers attached to the specified namespace.