Users Guide

Broadcom NVMe-FC-120UG-100

Emulex NVMe over Fibre Channel User Guide

End-To-End Data Protection Capabilities

First Eight Bytes : Supported

Last Eight Bytes : Not Supported

Namespace Multi-path I/O and Sharing Capabilities

Namespace Sharing : Supported

Reservation Capabilities

Persist Through Power Lost : Not Supported

Write Exclusive : Not Supported

Exclusive Access : Not Supported

Write Exclusive - Registrants Only : Not Supported

Exclusive Access - Registrants Only : Not Supported

Write Exclusive - All Registrants : Not Supported

Exclusive Access - All Registrants : Not Supported

Ignore Existing Key : Not Supported

Supported LBA Formats

LBA Format 0

LBA Format 1

LBA Format 2

LBA Format 3

If NSID is set to 0xFFFFFFFF, and namespace management is not supported, the following error message is displayed:

ERROR: <804>: Bad NVMe Namespace ID

This example shows the raw parameter specified:

hbacmd nvme-id-ns 10:00:00:90:fa:5d:05:a9 50:06:01:60:90:20:5C:38 nqn.2014-

08.com.example:nvme.host.sys.xyz 0x00000001 1 raw

Information similar to the following is displayed:

Raw data for namespace 0x00000001:

Standard data bytes:

Byte Dump

0000: 03 04 07 00 00 00 00 60 40 0c 70 06 8c 0a 00 00

0010: 04 02 00 0a 45 4d 55 4c 45 58 20 20 20 20 20 20

0020: 20 20 20 20 00 00 17 6a 41 46 42 52 2d 35 37 46

0030: 35 4d 5a 2d 45 4c 58 20 20 20 20 20 52 03 00 48

0040: 00 3a 00 00 41 41 31 32 32 31 4a 30 43 32 50 20

0050: 20 20 20 20 31 32 30 35 32 38 20 20 68 fa 05 3a

0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

…………: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00