Users Guide

Broadcom BT-FC-UG128-100
79
Emulex Boot for the Fibre Channel Protocol User Guide
To change the delay device discovery value, perform these steps:
1. From the adapter list (Figure 31), select the adapter whose device discovery delay settings you want to change and press
Enter.
2. From the main configuration menu (Figure 32), select Configure HBA and Boot Parameters and press Enter.
3. In the Configure HBA and Boot Parameters window, select Delay Device Discovery and press Enter.
Figure 52: Delay Device Discovery Screen
4. Use the + or - keys to change the delay device discovery value in increments of 10 seconds and press Enter.
The screen is refreshed with the new value.
5. Select Commit Changes and press Enter.